2015 Komatsu PC88MR 10

Selling Price -

Click for a Quote

Information

2015 Komatsu PC88MR 10

The PC88MR-10 is a link between minis and mid-size excavators. The PC88MR-10 has a swing boom, tight tail swing, three track options and backfill blade like a mini but is built to have the reliability and durability of larger excavators.

Features may include:
  • Efficient Hydraulic System

The PC88MR-10 uses a Closed Center Load Sensing (CLSS) hydraulic system that improves fuel efficiency and provides quick response to the operator's demands. The PC88MR-10 also introduces new technology to enhance the engine and hydraulic pump control. This total control system matches the engine and hydraulics at the most efficient point under different load conditions. There have also been improvements in the main valve and hydraulic circuit to reduce hydraulic loss, resulting in higher efficiency and lower fuel consumption.

  • High Rigidity Work Equipment

Booms and arms are constructed with thick plates of high tensile strength steel. In addition, these structures are designed with large cross-sectional areas and large one piece castings in the boom foot and the boom tip. The result is work equipment that exhibits long term durability and high resistance to bending and torsional stress.

  • Swing Boom

The swing boom allows the PC88MR-10 to work where a standard boom excavator could not.

  • Standard Blade

Every PC88MR-10 comes standard with a 2332mm 7'7" blade. A wide angle blade is also available as an option.

  • Pattern Change Value Standard

A pattern change valve is conveniently located below the cab, making switching from excavator controls to backhoe controls quick and easy.

Photos

Highlights

  • Pittsburg, Texas
  • Pre-Owned
  • 2015
  • Komatsu
  • PC88MR 10
  • Available

Specifications

  • 2015
  • Komatsu
  • PC88MR
  • 10
  • Medium
  • Komatsu SAA4D95LE-5
  • Water cooled, 4-cycle, direct injection
  • Turbocharged, and air-to-air aftercooled
  • 199 in³ / 3.26 ltr
  • Horsepower @ 2400 rpm:: Net (ISO 9249/SAE J1349) 65.5 HP - 48.8 kW
  • Arm crowd force (ISO): 8,160 lb - 3700 kg
  • 55 Ah/2 x 12 V
  • 35 A / 24 V
  • 4.5 kW / 24 V
  • 56 ltr / 14.8 U.S. gal
  • Pumps for: Swing and blade / Type: Fixed displacement gear
  • 70 ltr/min - 18.5 gal/min
  • Motor: 2 x piston motor with parking brake - Travel / 1 x piston motor with swing holding brake - Swing
  • Bucket (1): 90 mm x 710 mm x 55 mm - 3.54" x 27.95" x 2.17"
  • Swing circuit: 21.1 MPa 215 kgf/cm2 - 3,060 psi / Pilot circuit3.2 MPa 33 kgf/cm2 464 psi
  • Blade circuit (Raise):12.7 MPa 130 kgf/cm2 - 1,842 psi / Blade circuit (Lower): 21.1 MPa 215 kgf/cm2- 3,060 psi
  • bore x stroke x rod bore x stroke x rod
  • Swing (1): 20 mm x 638 mm x 60 mm- 4.72" x 25.12" x 2.36" / Arm (1): 100 mm x 861 mm x 60 mm - 3.9" x 33.9" x 2.36"
  • Blade (1): 130 mm x 200 mm x 65 mm - 5.12" x 7.87" x 2.56"
  • High: 3.2 mph - 5.1 km/hr / Low: 1.8 mph - 2.9 km/hr / Swing speed: 10.0 rpm
  • 4.83 psi / 0.34 kg/cm²
  • 15,050 lbf 66.9 kN / 6820 kgf - Max. drawbar pull
  • Swing drive: 2.8 ltr / 0.74 U.S. gal
  • 1.1 ltr / 0.29 U.S. gal
  • Travel Shoe: Mechanical disc
  • Track tension: Hydraulic
  • Track Rollers (each side): 5
  • 125 ltr / 33.0 U.S. gal
  • Radiator: 13 ltr / 3.43 U.S. gal
  • 11.5 ltr / 3.04 U.S. gal
  • Operatin Weight: 18,558 lb - 8420 kg - (with ROPS canopy and rubber shoe)